If you’ve ever tried to charge your phone in your BMW and the wireless tray stops working or doesn’t even start sometimes, it feels so frustrating. A lot of people run into this issue and wonder what to do next. Sometimes, when your tray is acting up, or you want to swap it out for something newer, knowing how to remove the wireless charging tray 849900 – BMW can really come in handy. And no, you don’t need a full car tech course to pull it off.
Why should it be Removed
Let’s be honest: tech stuff breaks sometimes. Especially when it’s something we use every time we get in the car. Maybe the tray isn’t charging anymore, or it’s loose. You may want to clean underneath, or you’re upgrading the setup. Whatever the reason, the fix doesn’t always require a trip to the shop.
Tools You will Need
Most people already have what they need at home. Grab a flathead screwdriver (or better a plastic trim remover so you don’t scratch anything), a Torx screwdriver (usually T20), and maybe a flashlight if your car’s interior is a bit dim.
Step by Step Method
So, here is the step by step method of how to remove the wireless charging tray 849900 – BMW without breaking anything.
- First, turn off the car completely
Seriously, make sure it’s off, including the key fob. No power should be running through the system. - Open the center console where the charging tray sits
Take a good look. Depending on your model, you might see a couple of screws or clips. - Use your trim tool (or flathead) to gently pop the tray edges
Work slowly. If it feels stuck, don’t force it. There may be a hidden clip. - Once loose, check for screws holding it down
These might be tucked under a rubber cover or small flap. Use your Torx driver here. - The plug
Underneath the tray, there should be a connector. Press the little tab and gently pull it out. - And you’re done
Lift the tray out and set it aside. That’s it.
A Few Tips So You Don’t Break Anything
Below are listed down a couple of things people often miss:
- Don’t use too much force. If it feels stuck, double-check for a missed screw or clip.
- Metal tools work, but plastic ones are safer for the interior trim.
- If you’re not putting the tray back right away, cover the open area to avoid dust collecting in the connector.
How to Put it Back?
Putting it back in is pretty straightforward. Just plug the connector back in, line it up, screw it down, and place the tray back into place. Easy.
FAQs
Q: Do I need to go to the dealership for this?
No. If you’re comfortable with small tools, it’s something you can totally handle yourself.
Q: Will removing the tray mess with anything else in my car?
Not really. As long as you’re careful with the wiring and only unplug the tray’s connector, you’re good.
Q: Can I put in a new tray myself?
Yes. As long as it’s a compatible one, swapping it in is the same process in reverse.
Conclusion
So now you know exactly how to remove the wireless charging tray 849900 – BMW without feeling like you need a car manual written in code. It’s honestly a pretty easy job, and once you’ve done it once, it’s even easier the next time. Whether you’re upgrading or just giving your car a bit of care, this quick fix can go a long way.
